esphome:
  name: thermostat-bedroom
  friendly_name: thermostat-bedroom
  platform: ESP8266
  board: esp12e
  #board: nodemcuv2

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "FwV4CMZTQlJAV/tX/ga3sBJ84LgwX8Y94+rUIJAZ7UQ="

ota:
  password: "b85f91e578339455d1eb6f4c91a0c413"

wifi:
  ssid: "Saints&Strangers_"
  password: "xYhnac-5mixdu"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Thermostat-Bedroom"
    password: "yUHEnZm3ZARc"

captive_portal:

number:
  - platform: template
    name: "ac_target_temp_slider"
    id: "ac_target_temp_slider"
    step: 1
    min_value: 50
    max_value: 80
    mode: slider

binary_sensor:
  - platform: gpio
    pin: GPIO14
    name: "Target Temp Increment"
    device_class: button

button:
  - platform: template
	name: "Target Temp Increment"
	id: increment_target_temp
	on_press:
	  - number.increment:
		  id: ac_target_temp_slider
		  cycle: false

sensor:
  - platform: homeassistant
	name: "House Temperature"
	id: house_temp
	entity_id: sensor.house_temperature_avg

font:
  - file: 'fonts/Roboto-Thin.ttf'
    id: font1
    size: 15

i2c:
  sda: GPIO4
  scl: GPIO5

display:
  - platform: ssd1306_i2c
    model: "SSD1306 128x64"
    address: 0x3D
	lambda: |-
	  it.printf(0, 0, id(font1), "Set Temp:");
	  it.printf(5, 22, id(font), "%.1f%°F", id(ac_target_temp).state);
	  it.printf(0, 0, id(font1), "Current Temp:");
	  it.printf(5, 22, id(font), "%.1f%°F", id(house_temp).state);